GIANTECH Review
Skip to content Close Menu
  • Home
  • Learning
    • IGG/N2
    • Boiler/Burner
    • Technology
    • Other Equipment
  • Equipment
Skip to content

IGG/N2

Pressure Swing Absorption vs Membrane: Which Nitrogen Generator should I use?

Adel Lee 03/03/2021 0
Managing safety on a ship involves considering many different factors, however this article will be…

5 Things About Air Products Norway You Should Know About

06/07/2019 0
Air Products AS (APAS) is one of the many N2 Generators makers supplying N2 systems to the marine and offshore industry. It has, as at 2019, supplied over 1400 units…

3 Types of Inert Gas Systems You Should Know About

14/05/2019 0
1. Inert Gas Generators (IGG) How this works: Inert Gas Generators (IGG) produce inert gases that are delivered to a ship’s cargo tanks, to prevent the combustion of fuel oil…

The Inert Gas Generator (IGG)

10/10/2018 0
Maritime Protection IGG Main Components The Inert Gas System is arguably the most essential safety system on board every product, oil, LNG and crude tanker and many chemical-carrying vessels. It is…

Boiler/Burner

5 Types of Boiler Services

Anika 27/01/2021 0
Needed to produce steam to heat and process loads on ships, marine boilers are an…

Marine Equipment Series: Types of Burners

13/11/2019 0
Types of Burners In the marine industry, gas and oil-fired marine boilers both utilise the controlled combustion of fuel to heat water. The burners in the boilers are involved in…

The Boiler Series (Part 3 of 3): Single or Multi? – Gas Flows in Fire-tube Boilers

10/04/2019 0
The number of passes in the gas flow is another way to classify fire-tube boilers. This is applicable for fire-tube boilers as the flue gases are traveling in the tubes…

The Boiler Series (Part 2 of 3): Source of Heat

05/03/2019 0
Marine boilers can also be classified by their heat source. Marine boilers are usually fired by burner with fuel oil or waste gas (diesel engine exhaust) or a combination of…

Technology

Ballast Water System in Singapore for Ship Managers

Adel Lee 03/03/2021 0
Invasive marine species populations have grown at alarming rates due to the increasing volume of…

Is Your Maritime Company Digitizable?

01/02/2021 0
Whether you are a shipowner, equipment maker, marine engineer or trader, you are bound to notice that most, if not all, companies are now undergoing a digital transformation. Business models…

Mixed Reality: The Next Frontier of Learning and Development?

28/01/2021 0
Mixed Reality (MR) looks set to be the way forward in learning and development as the marine industry undergoes digital transformation. The multifunctional abilities of MR technology, from safety to…

Covid-19 shipping disruptions: Solve biofouling with pasteurisation

22/01/2021 0
Dilong Goh for The Straits Times Many vessels were stalled earlier this year when the coronavirus pandemic halted global shipping traffic. Even months later, we are still seeing this issue…

Other Equipment

5 Things You Can Do to Make Your O2 Analysers Happy

Bryan Kwa 28/01/2021 0
Enough is Enough Dear ship crew, we feel you. After many repairs of O2 Analysers,…

Why You Should Dry Out Your Incinerator Refractory

27/01/2021 0
After repairing your incinerator refractory, it is important to dry out the moisture in the refractory material by preheating the refractory. Figure 1: An incinerator in operation Take note! The…

Types of Marine Compressors

27/01/2021 0
Marine compressors are integral to the proper functioning of your vessel. Many pieces of equipment on-board your vessel are dependent on the compressed air that the marine compressor generates. This…

3 Types of Repair to Incinerator Refractory

26/01/2021 0
The type of refractory repair needed for marine incinerators depends on the extent of damage to the refractory lining. The original equipment maker, Atlas Incinerators A/S, distinguishes three types of…

Recommended Reading

5 Types of Marine Boilers

  • Michael Brecker
  • 16/01/2019

5 Types of Boiler Services

  • Anika
  • 27/01/2021

The Boiler Series (Part 1 of 3): Fire vs Water: What’s the Difference Between Fire vs Water Marine Boilers?

  • Michael Brecker
  • 30/01/2019

The Inert Gas Generator (IGG)

  • Dilong Goh
  • 10/10/2018

3 Types of Inert Gas Systems You Should Know About

  • Dilong Goh
  • 14/05/2019

5 Benefits of Maritime Protection Inert Gas System

  • Dilong Goh
  • 26/12/2014

4 Common Causes of Damage to Incinerator Refractory

  • Justin Si
  • 22/01/2021

3 Types of Repair to Incinerator Refractory

  • Justin Si
  • 26/01/2021

Why You Should Dry Out Your Incinerator Refractory

  • Justin Si
  • 27/01/2021

What to Look Out for When Choosing Pressure Vacuum Valves

  • Dilong Goh
  • 29/04/2019

Test Rig for Pressure Vacuum Valve

  • Dilong Goh
  • 28/10/2018

3 Types of Kyma Performance Systems: What You Need to Know

  • Anika
  • 22/01/2021

About GIANTECH Review

A creation and collaboration between major marine service providers, GT Review is populated with engineering, education, and review articles to offer valuable, on-demand knowledge to players in the marine industry. Our content includes marine equipment insights, life-cycle management strategies, and easy to understand technical perspectives to assist ship crew, engineers, and managers in making the best possible decisions.

 

For more information about Giantech, click here 

OUR CONTRIBUTORS

Adel Lee
Anika Agarwal
Bryan Kwa
Dilong Goh
Jaymee Justiniano
Justin Si
Lim Sze Jia
Michael Brecker

Copyright 2020 © GIANTECH Review
  • About Us
  • Contact Us
  • Contribute
  • Our Contributors